oo Warshada Mashiinnada Qalajinta & Qalajinta Shiinaha iyo alaab-qeybiyeyaasha |Zhongshuo

Hal qayb oo ka mid ah WUXI ZHONGSHUO MACHINERY CO., LTD

English
Maydhista & Qalajinta Sawirka
  • Maydhista & Qalajinta
  • Maydhista & Qalajinta
  • Maydhista & Qalajinta

Maydhista & Qalajinta

Sharaxaad Gaaban:

Nadiifinta burushka iyo nadiifinta buufinta labaduba waxay muujiyeen inay si wax ku ool ah uga shaqeeyaan unugyada WUXI ZHONGSHUO.Biyaha kulul ama saabuunta kulul ayaa loo isticmaalaa habka nadiifinta.Ku luqluqashada waxaa lagu sameeyaa nidaamka cascade biyaha kulul.Dabcan, daaweynta warbaahintu waxay muhiim u tahay sida qalabka habka.A...


  • Dekedda:Shanghai, Shiinaha
  • Shuruudaha Lacag-bixinta:T/TL/C
  • Awoodda Wax-soo-saarka:20 qaybood / sanad
    • U soo deji sidii PDF

    Faahfaahinta Alaabta

    Hordhaca Shirkadda

    MASHRUUCA MUUJINAYA

    Nadiifinta burushka iyo nadiifinta buufinta labaduba waxay muujiyeen inay si wax ku ool ah uga shaqeeyaan unugyada WUXI ZHONGSHUO.Biyaha kulul ama saabuunta kulul ayaa loo isticmaalaa habka nadiifinta.Ku luqluqashada waxaa lagu sameeyaa nidaamka cascade biyaha kulul.Dabcan, daaweynta warbaahintu waxay muhiim u tahay sida qalabka habka.Wareegga saxda ah ee warbaahintu uma baahna taangiyada, xarunta bamka iyo kulaylka beddelayaasha.Sidoo kale unugyada shaandhaynta, skimmer saliidda iyo demister waxay u baahan yihiin inay qayb ka noqdaan wareegga.Nidaamka aragga casriga ah wuxuu u oggolaanayaa hawlwadeenku inuu ku socodsiiyo unugga hoos u dhigista qaab toos ah.Dhammaan macluumaadka muhiimka ah sida heerarka taangiga, heerkulka, culeyska shaqada, xawaaraha burushka, iwm. ayaa lagu soo bandhigi doonaa HMI-ga.

  • Hore:
  • Xiga:

    • Hordhaca Shirkadda

     

    Taariikhdeena:

    Khabiirka Dhulka Dusha Sare ee Abrasives suunka Shiida ee Birta: Bartilmaameedkani waxa uu ina hagayaa in aan cilmi baadhis ku samayno shiididda biraha iyo turxaan bixinta meelaha abrasives dahaarka leh laga soo bilaabo 1990-meeyadii.

    Sannadkii 2005tii waxa aanu bilownay nakhshadeynta, soo saarista iyo isu geynta mashiinada wax lagu shiidi karo ee suunka abrasives ballaaran.Iyada oo balaadhinta joogtada ah ee ganacsiga iyo isbeddelka qaab dhismeedka saamilayda,

    2015 WUXI Zhongshuo Precision Machinery Co., Ltd ayaa la aasaasay.

     

    Shirkadeena:

    Waxaan nahay shirkad leh cabbir dhexdhexaad ah oo la maareeyo.Shirkaddu waxay ku taal Wuxi City, Gobolka Jiangsu.Caasimada diiwaan gashan waa 8 milyan RMB.Aagga dhismuhu wuxuu ka sarreeyaa 7000 m2.Tirada guud ee shaqaaluhu waa 52, oo ay ku jiraan 1 injineer heerka cilmi baarista, 2 injineero sare iyo 5 injineer.Waxaan leenahay naqshadeynta xirfadlayaasha, wax soo saarka, isu-ururinta, rakibidda, komishanka iyo kooxda adeegga iibka.

    Alaabtayada

    Waxaan soo saareynaa suunka suunka ballaaran iyo mishiinka dhalaalka, mashiinka burushka, mashiinka dhamaystirka muraayadda, mashiinka dhamaystirka gariirka, mashiinka dhejiska ee birta iyo xaashida, oo ay ku jiraan qaybta gelitaanka iyo bixista ee CGL Khadka polishing Line-ka ee Xarunta Adeegga), ie Unwinder, Rewinder, Loading Car, Roll-Pinch Roll, Flattener, Shear dalagga, Nadiifinta qaboojiyaha iyo habka dib-u-warshadaynta, Habka dhaqida iyo qalajinta, Ceryaan ururiyaha, Nidaamka Dabka.Waxa kale oo aanu ku siinaynaa qalabka wax lagu shubo kooxda Vacuum Cups ee xaashida ilaa xaashida wax lagu shido

    Macaamiishayada:

    Liistada tixraaca oo ay ku jiraan Tisco Daming, Wuxi Puxin, Zhejiang Bohai iyo macaamiisha kale ee Shiinaha ee caanka ah.Waxaan u dhoofinay alaabtayada dalka Yurub sida Talyaaniga, Turkiga oo wata Shahaadada CE.Waxa kale oo aanu siinaa furaha suunka wax lagu shido ee sameeya Shiineeska kaas oo agabka siiya Diyaarado iyo Nukliyeerka.

    macaamiisheena

     

    Shahaadadayada

     

     

     

    Mashaariicda

    DMSSC

     

     

     

     

    Si loo abuuro qiimaha macaamiisha waa dabagal joogto ah.Ku qanacsanaantaadu waa awooda hal-abuurkeena joogtada ah.

     

     

    CPL-Cil to Gariiradda polishing Line for Stainless Steel Service Center 

    MACMIIL:浦新金属

    Gariiradda duubista khadka polishing ee DMSSC

    CPL waxaa badanaa laga codsadaa in meesha laga saaro ciladaha yaryar ee ku jira gariiradda SS qabow ee qoyan, hel dhamaystirka qurxinta, sida No.3, No.4, HL, SB & Duplo.Qaboojiyahu wuxuu noqon karaa emulsion ama saliid macdanta.Sifeynta qaboojiyaha iyo nidaamka dib u warshadaynta ayaa lama huraan u ah khadka dhammaystiran.ZS CPL waxaa loogu talagalay in lagu duubo gariiradda qaboobaha si loo farsameeyo ilaa 100 ilaa 1600 mm ballac iyo dhumuc u dhexeeya 0.4 ilaa 3.0 mm.WUXI ZS sidoo kale waxay bixisaa CPL qalalan.Suunka Cork ayaa lagu dabaqi doonaa si loo helo dhamaystir la mid ah Scotch-Brite finishing (SB), xawaaraha quudinta ee CPL qalalan waxay noqon kartaa 50m/min ama ka badan.

    SPL-Sheet to Sheet Line Polishing (Nooca Qoyan)

    MACMIIL:太钢大明

    3

    Makiinada wax lagu shiido xaashida (Nooca Qoyan) waxay u isticmaashaa Shiidaalka Saliida ama Emulsion Warbaahin ahaan si ay u gaadho saamayn fiican oo dhalaalaysa oo wax shiidi kara xaashida birta ah ee kulul ama qabowga duuban ama gariiradaha.Mashiinka waxaa loogu talagalay in uu helo Dhamaystirka No.3 (Dhammaystirka Qalafsan, Hadhuudhka Abrasive From G60 ilaa G150) ama No.4 (Fine Finishing, Most Popular, abrasive grain from G180 Ama ka sare) iyo HL Finishing (Dhammaystirka timaha, Lagu gartaa Smooth iyo line dheer).ZSSPL waxaa loogu talagalay qabowgaxaashi ilaa xaashi shiidifarsamaynta ilaa600 ku2200mm ballac iyo dhumuc u dhexeeya 0.4 ilaa 3.0 mm.

     

    PGL-Shida Khadka Tooshka ah ee Saxan Culus

    MACMIIL:西部金属

     4

    Shiidida Toos ah oo Buuxa iyo Khadka Tooshka ah ayaa inta badan loo codsadaa in meesha laga saaro cilladaha rogrogmida kulul, qaadista & tirtiridda iyo cabbirka haraaga, oo lagu gaaro dhumucda la codsaday iyo qallafsanaanta.Qaboojiyahu wuxuu noqon karaa emulsion ama saliid macdanta.Sifeynta qaboojiyaha iyo nidaamka dib u warshadaynta ayaa lama huraan u ah khadka dhammaystiran.ZSPGLwaxaa loogu talagalay in lagu farsameeyo saxan culus oo duuban oo kulul laga bilaabo 600 ilaa 2200 mm ballac iyo dhumuc u dhexeeya 1.0 ilaa 30 mm.WUXI ZS sidoo kale waxay bixisaa PGL qalalan.

    Mashiin Dhamaystirka (8K) Mashiinka Taarikada Biraha Ah

    MACMIIL:新华医疗

    5

    Faa'iidada WUXI 25 Mashiinka Dhammaystirka Muraayada ee Gariiradda Birta Aan Lahayn iyo Sheet.Hogaamiyeyaasha koox kastaa waxay noqon karaan kuwo madax banaan ama isku dhafan likor iyo hoos loo qaaday .Tixraaca xaruntailing of polishing compound si aad uga fogaato dusha hoose ee saxanka polishing get burnt.Bir aan daawa lahayn oo la sameeyay .Anti daxalka iyo dheernolosha.Dhaqdhaqaaq toosan oo toosan oo toosan.

     

    Mashiinka Dhammaystirka Muraayada ee Gariiradda Wareegga Qabow iyo Xaashida

    CLIENT:MINOX(INDIA)

    6

    Qabo nooca duubka.Waxay khusaysaa giraangiraha shiida ee resin bonded, Scotch-Brite disc, polishing compound oo ka kooban 5% Al2O3 + 5% nitric acid + 90% biyo si loo hagaajiyo qallafsanaanta dusha sare talaabo talaabo, ugu dambeyntii dhamaystirka muraayada super waa la heli karaa (8K).

    Aaladda Si Toos ah u Raraya/U-dejinta oo wata Kooxda Koobabka Vacuum

    MACMIIL:博海金属

    7

    Waxay ka kooban tahay jir gantry ah oo ka samaysan alxanka, birta kaarboonka iyo cabbir ku habboon si loo taageero walaaca shaqada.Qalabku wuxuu ka kooban yahay kooxaha soo socda: Cutubka turjumaada, unugga qaadista, unugga soo qaadida Vacuum.

    Qaybta tarjumaada waxaa haga hagaha khadka, oo uu ku wado matoorka servo iyadoo la adeegsanayo qalabka iyo pinion.Cutubka qaadista oo uu hagayo hagaha xargaha, oo uu wado piston-ka pneumatic-ka.Cutubka soo qaadistu waxa uu ka kooban yahay 3 baararka wax-qabad ee la hagaajin karo oo leh 18 koob oo nuugista ah, baarka meel go'an ayay ku taallaa laakiin koob kasta oo nuugista ayaa si dheer u socon kara, hawl-wadeenku waxa uu sii dayn karaa qalabka, hagaajinta booska koobka nuugista, mar kale xidh qalabka si fudud.

    Koob kasta oo nuugista waxa uu ku xidhan yahay tuubooyinka pneumatic-ka ee gaarka ah si loo hubiyo habsami u socodka nidaamka, koob kasta oo wax nuugista waxa uu ku xidhan yahay seeraha guga si loo hubiyo meel banaan oo ku filan oo u dhaxaysa koobabka iyo qaybta shaqada.

    Laminator Toos ah oo loogu talagalay Ilaalinta Filimka (Mashiinka Dahaarka PVC)

    MACMIIL: MIDABKA BIRTA(TALYAANIGA)

     8

    Mashiinka Dahaarka Tooska ah / PVC waxaa inta badan loo isticmaalaa Lamination Film ee dusha sare ee Sheet.Waxaa loo qaabayn karaa Laminating Double side Double.

    Lamination Toos ah, Goyn Toos ah.

    * Habka Mashiinka: 400-2500 Nooca

    * Ballaca La Shaqeyn Karo: 400-2500MM

    * Xawaaraha shaqada: Xawaaraha go'an/xawaaraha la hagaajin karo

    * Codsiga: Mashiinkan waxaa inta badan lagu isticmaalaa Nidaamka Coiler/De-coiler System,
    Mishiinka Tooshka ah, Mishiinka Dambiisha ee 8K, La Jaray Laynka Dhererka,
    Mishiinka wax shiida IWM.

    * Mashiinada waxay noqon karaan kuwo tolman.

    Halkan ku qor fariintaada oo noo soo dir

    Qaybaha alaabta